RENOPLAN SYSTEM 4

How can new floor covering be bonded quickly
and easily to existing wearing surfaces?

With Sigan 2.

Tearing out existing wearing surfaces is elaborate and accompanied by inconveniences as well as unproductive downtimes. Sigan 2 offers a quick and sure solution and what’s more, it can be removed without residues even after years. New PVC, CV and nora rubber flooring can be installed quickly and clean on existing PVC or linoleum substrates using the switchTec® adhesive technology from UZIN.

 

 

<p>Step 1: Damp-sweep the substrate with clean water to
remove dust, dirt, etc...</p>

Step 1: Damp-sweep the substrate with clean water to remove dust, dirt, etc...

<p>Step 2: First perform a trial bonding to check whether
Sigan 2 adheres well to the existing PVC floor
covering.</p>

Step 2: First perform a trial bonding to check whether Sigan 2 adheres well to the existing PVC...

<p>Step 3: Affix the supplied Sigan tape along walls and protrusions.
This provides increased adhesive strength
in the edge areas.</p>

Step 3: Affix the supplied Sigan tape along walls and protrusions. This provides increased...

<p>Step 4: Install the Sigan sheets on butt in the direction of the floor covering to be installed or cut back the overlap of the sheets on butt.</p>

Step 4: Install the Sigan sheets on butt in the direction of the floor covering to be installed or...

<p>Step 5: Fit the acclimatized floor covering and fold back half of the floor covering.</p>

Step 5: Fit the acclimatized floor covering and fold back half of the floor covering.

<p>Step 6: Remove the protective paper from Sigan 2.</p>

Step 6: Remove the protective paper from Sigan 2.

<p>Step 7: Slide the floor covering without open time onto the Sigan film carrier and roll-out. Follow the same procedure with the 2nd half of the floor covering.</p>

Step 7: Slide the floor covering without open time onto the Sigan film carrier and roll-out. Follow...

<p>Step 9: The floor covering can be walked on and used right after bonding. The floor covering can be removed without residues even years later.</p>

Step 9: The floor covering can be walked on and used right after bonding. The floor covering can be...